modern block construction, service ducts to each flat, ceiling voids used for cable routing. Access is easy inside the flat; the constraint is the freeholder relationship for anything touching the common parts.
If you own a modern flat in Caerphilly and need consumer unit upgrades, the right spec is usually not the most expensive one. On this stock the sensible answer is SPD retrofit — matched to the wiring generation, not a lift-and-shift from a new-build brochure.
That is the standard we quote to. Fixed price, honest survey, RCBO-per-circuit CU where the base board only had RCDs, and paperwork the next EICR won't question.
Focus on the utility cupboard, the consumer unit location, and the intended cable route. Usually 15–30 minutes on-site or a short photo set.
Priced against your modern flat's specific construction, not a template. Route sketched, materials listed, no line-item surprises.
Diary planned for the access constraint that matters on this stock — access is easy inside the flat; the constraint is the freeholder relationship for anything touching the common parts.
NICEIC certificate, photo evidence of hidden work, Part P where applicable — all emailed the evening the job signs off.
Access is easy inside the flat; the constraint is the freeholder relationship for anything touching the common parts.
Wiring generation on this stock is typically current, but often ex-developer with the same headroom issues as new-builds. On a modern flat you should expect us to flag: developer CU inside a bedroom or kitchen — noise nuisance from RCBO trips; no SPD in the base install; communal EV provision governed by the freeholder, not the individual flat.
Materials and methods we spec on modern flat work: SPD retrofit; RCBO-per-circuit CU where the base board only had RCDs; sub-main uplift only where the freeholder consents. Everything is priced on the quote — nothing added on invoice.
Across CF83 the modern flat stock we've worked on shares consistent patterns: developer CU inside a bedroom or kitchen — noise nuisance from RCBO trips. That local pattern is baked into the quote, not discovered on the day.
For a modern flat usually yes — a 15-minute survey or a set of photos of the utility cupboard and the consumer unit is enough to write a fixed price.
SPD retrofit; RCBO-per-circuit CU where the base board only had RCDs; sub-main uplift only where the freeholder consents. All on the written quote.
Two things: developer CU inside a bedroom or kitchen — noise nuisance from RCBO trips, and the wiring generation — current, but often ex-developer with the same headroom issues as new-builds. Both go on the quote, not the invoice.
Not unless the quote says so. On period stock in particular we route through floors, lofts and non-original plaster; cornices, dado rails and original panelling stay intact.
Owners of modern flat properties in Caerphilly, Cardiff and the wider area get one point of contact for the lot — quote, work, certificate, after-care.
Practical next step: photos of the utility cupboard or a 15-minute survey, fixed written quote back inside 24 hours, work booked around your keep it compliant and quiet. That's the whole process for a Caerphilly modern flat, on one page.
One local point of contact for modern flat work across Caerphilly and the surrounding Cardiff / Newport area — quote, work, certificate and after-care.
