9-inch solid brick with plaster-on-lath internally, timber-framed front bay. Side-return access on most plots, which gives an EV cable a straight run from the CU to a driveway charger without touching the front elevation.
If you own a Edwardian semi in Mountain Ash and need eicr — electrical safety checks, the right spec is usually not the most expensive one. On this stock the sensible answer is metal-clad 18th Edition CU — matched to the wiring generation, not a lift-and-shift from a new-build brochure.
That is the standard we quote to. Fixed price, honest survey, TT earth rod where the DNO earth is missing, and paperwork the next EICR won't question.
Focus on the hallway or cellar, the consumer unit location, and the intended cable route. Usually 15–30 minutes on-site or a short photo set.
Priced against your Edwardian semi's specific construction, not a template. Route sketched, materials listed, no line-item surprises.
Diary planned for the access constraint that matters on this stock — side-return access on most plots, which gives an ev cable a straight run from the cu to a driveway charger without touching the front elevation.
NICEIC certificate, photo evidence of hidden work, Part P where applicable — all emailed the evening the job signs off.
Across CF45 the Edwardian semi stock we've worked on shares consistent patterns: front-bay window seats hiding original single-insulated conductors. That local pattern is baked into the quote, not discovered on the day.
Side-return access on most plots, which gives an EV cable a straight run from the CU to a driveway charger without touching the front elevation.
Wiring generation on this stock is typically rewired 1970s–2000s; front-bay circuits and porch lighting frequently missed on partial rewires. On a Edwardian semi you should expect us to flag: front-bay window seats hiding original single-insulated conductors; porch lighting on a spur off the hall circuit with no dedicated CPC; cellar or under-floor damp affecting the incoming supply.
Materials and methods we spec on edwardian semi work: metal-clad 18th Edition CU; TT earth rod where the DNO earth is missing; IP65 outdoor isolator on the side-return. Everything is priced on the quote — nothing added on invoice.
Owners of Edwardian semi properties in Mountain Ash, Aberdare and the wider area get one point of contact for the lot — quote, work, certificate, after-care.
For a Edwardian semi usually yes — a 15-minute survey or a set of photos of the hallway or cellar and the consumer unit is enough to write a fixed price.
Front-bay lighting and the porch spur, most often. We include both in every EICR and flag them separately if a partial rewire is on record.
metal-clad 18th Edition CU; TT earth rod where the DNO earth is missing; IP65 outdoor isolator on the side-return. All on the written quote.
Two things: front-bay window seats hiding original single-insulated conductors, and the wiring generation — rewired 1970s–2000s. Both go on the quote, not the invoice.
Not unless the quote says so. On period stock in particular we route through floors, lofts and non-original plaster; cornices, dado rails and original panelling stay intact.
Bottom line: edwardian semi owners in Mountain Ash deserve a quote calibrated to c.1901–1918 construction, not a template. That's what we do, on every job.
Send the address, a photo of the hallway or cellar and the consumer unit, and the keep the original features you're working towards. Written fixed quote back inside 24 hours, priced to the actual construction of your Edwardian semi.
