Fixing an unsatisfactory EICR in Port Talbot
For Port Talbot owners and landlords: fixing an unsatisfactory eicr, carried out to BS 7671 and written up properly. Port Talbot coverage for fixing an unsatisfactory eicr includes Maesteg at the same rates.
Book the inspectionOwners and landlords across SA12–SA13 ask about this in roughly equal numbers, for slightly different reasons.
Age alone does not condemn an installation. Plenty of older Port Talbot wiring tests perfectly well; some newer work does not. It is written into the report either way, so nothing is hidden.
Port Talbot sits inside the area we work daily, so a follow-up visit is not a logistical problem if one is needed. Anyone testing properly will reach the same conclusion.
fixing an unsatisfactory eicr in Port Talbot is rarely identical to the same job twenty miles away: steelworks-era terraces in Aberavon and Sandfields behave differently from newer stock, and the SA12–SA13 postcode covers both. It rarely changes the price, but it does change the plan.
fixing an unsatisfactory eicr tends to be judged on the finish, but the part that matters sits behind the wall and only shows up in the readings. We would rather rule out a purchase held up by early than discover it late.
There is no single right answer for fixing an unsatisfactory eicr — the correct one depends on the age of the installation and how it has been altered since. Most Port Talbot visits settle this within the first hour.
We work locally every week, so this is routine rather than a special journey. The short version: get it measured, then decide. Everything else follows from the readings.
Frequently reported from SA12–SA13: a purchase held up by an adverse electrical report.
Remedials from a previous cycle never completed and now. We record the reading rather than describing it vaguely.
Landlords and owner-occupiers in Port Talbot both see a report returned unsatisfactory by another contractor.
On SA12–SA13 addresses the trail usually leads back to an agent or tenant chasing remedials before a tenancy.
We carry out the work, retest the affected circuits as part of the same visit.
We reissue or supplement the report confirming the installation is. If that resolves it, that is where the job stops.
We review the existing report and separate mandatory codes to the current edition of the wiring regulations.
First job on arrival: price the remedials line by line so you can.
Scope, access and timing below assume a SA12–SA13 address.
What the remedial works certificate and reissued report actually covers
C1 means danger present and requires immediate action. C2 means potentially dangerous and requires urgent remedial work. FI means further investigation is needed. C3 is an improvement recommendation and does not make a report unsatisfactory — which matters, because some quotes bundle C3 items in as though they were mandatory.
Do not skip this — where a report is unsatisfactory, remedial work should be carried out by a qualified person and evidenced with certification. In rented property, landlords are expected to act on C1, C2 and FI codes promptly.
Why people in Port Talbot ask for it
- Remedials from a previous cycle never completed and now repeated. No extra charge attaches to it.
- One of the usual points: a report returned unsatisfactory by another contractor.
- An agent or tenant chasing remedials before a tenancy starts. This is the part people ask about most.
What happens on the day
- 1Review the existing report and separate mandatory codes from recommendations. No extra charge attaches to it.
- 2One of the usual points: reissue or supplement the report confirming the installation is satisfactory.
- 3Price the remedials line by line so you can see what each code costs to clear. This is the part people ask about most.
- 4Very often — carry out the work, retest the affected circuits and certify.
Pricing works like this — most domestic remedial schedules are a day or less. C1 items are treated as urgent and attended ahead of routine work.
What the result can say
Port Talbot context
Neath Port Talbot County Borough Council handles building control notification for Port Talbot, and we register notifiable work there as part of the job.
Travel to Port Talbot is already built into how the week is planned, so it does not appear on your invoice as a surcharge.
If you are just outside Port Talbot — Neath, Bridgend, Maesteg — the same rates and response apply.
Questions about the remedial works certificate and reissued report
What if you find something unrelated?
It gets reported, not quietly fixed. You decide whether it is dealt with now or later.
Why does testing take so long?
Because each circuit is measured individually. A report returned unsatisfactory by another contractor would be missed by a walk-round inspection.
What if I have had this looked at before?
Bring us the previous report if you have one. We test independently but it is useful to see what changed.
Is the work guaranteed?
Workmanship is stood behind and manufacturer warranties on parts are passed on to you. We do not offer guarantees we cannot honour.
How quickly can you attend in Port Talbot?
Most domestic remedial schedules are a day or less. C1 items are treated as urgent and attended ahead of routine work. Housing here is steelworks-era terraces in Aberavon and Sandfields, and that shows in what we find.
Speak to the electrician directly
Describe what the property is doing and when it started. We will tell you whether it is urgent or plannable. Access details for the Port Talbot property are the only thing we need to get started.
For Port Talbot owners and landlords: fixing an unsatisfactory eicr, carried out to BS 7671 and written up properly. Port Talbot coverage for fixing an unsatisfactory eicr includes Maesteg at the same rates.