modern block construction, service ducts to each flat, ceiling voids used for cable routing. Access is easy inside the flat; the constraint is the freeholder relationship for anything touching the common parts.
If you own a modern flat in Swansea and need eicr — electrical safety checks, the right spec is usually not the most expensive one. On this stock the sensible answer is SPD retrofit — matched to the wiring generation, not a lift-and-shift from a new-build brochure.
That is the standard we quote to. Fixed price, honest survey, RCBO-per-circuit CU where the base board only had RCDs, and paperwork the next EICR won't question.
Focus on the utility cupboard, the consumer unit location, and the intended cable route. Usually 15–30 minutes on-site or a short photo set.
Priced against your modern flat's specific construction, not a template. Route sketched, materials listed, no line-item surprises.
Diary planned for the access constraint that matters on this stock — access is easy inside the flat; the constraint is the freeholder relationship for anything touching the common parts.
NICEIC certificate, photo evidence of hidden work, Part P where applicable — all emailed the evening the job signs off.
Access is easy inside the flat; the constraint is the freeholder relationship for anything touching the common parts.
Wiring generation on this stock is typically current, but often ex-developer with the same headroom issues as new-builds. On a modern flat you should expect us to flag: developer CU inside a bedroom or kitchen — noise nuisance from RCBO trips; no SPD in the base install; communal EV provision governed by the freeholder, not the individual flat.
Materials and methods we spec on modern flat work: SPD retrofit; RCBO-per-circuit CU where the base board only had RCDs; sub-main uplift only where the freeholder consents. Everything is priced on the quote — nothing added on invoice.
Across SA1–SA7 the modern flat stock we've worked on shares consistent patterns: developer CU inside a bedroom or kitchen — noise nuisance from RCBO trips. That local pattern is baked into the quote, not discovered on the day.
Two things: developer CU inside a bedroom or kitchen — noise nuisance from RCBO trips, and the wiring generation — current, but often ex-developer with the same headroom issues as new-builds. Both go on the quote, not the invoice.
Usually 1.5–2 hours. Fewer circuits, tidy cable dressing, standard testing. Certificate emailed the same evening.
Not unless the quote says so. On period stock in particular we route through floors, lofts and non-original plaster; cornices, dado rails and original panelling stay intact.
Common enough that we work on this stock most weeks. coastal terraces in Mumbles and Sketty, older miners' housing in Morriston, and post-war semis around Gorseinon — the modern flat is a recognisable slice of that mix.
Access is easy inside the flat; the constraint is the freeholder relationship for anything touching the common parts. We mark the route at survey and price against it.
Owners of modern flat properties in Swansea, Neath and the wider area get one point of contact for the lot — quote, work, certificate, after-care.
Short version: eicr — electrical safety checks on a modern flat in Swansea works best when the survey accounts for modern block construction, the quote is fixed, and the materials (SPD retrofit) are matched to the stock — not lifted from a new-build spec.
Modern Flat owners in Swansea usually want to know two things: will you know what you're looking at, and will the price be fixed. Yes to both — we work on this stock every week and price everything on paper.
