9-inch solid brick with plaster-on-lath internally, timber-framed front bay. Side-return access on most plots, which gives an EV cable a straight run from the CU to a driveway charger without touching the front elevation.
If you own a Edwardian semi in Port Talbot and need emergency callouts, the right spec is usually not the most expensive one. On this stock the sensible answer is metal-clad 18th Edition CU — matched to the wiring generation, not a lift-and-shift from a new-build brochure.
That is the standard we quote to. Fixed price, honest survey, TT earth rod where the DNO earth is missing, and paperwork the next EICR won't question.
Focus on the hallway or cellar, the consumer unit location, and the intended cable route. Usually 15–30 minutes on-site or a short photo set.
Priced against your Edwardian semi's specific construction, not a template. Route sketched, materials listed, no line-item surprises.
Diary planned for the access constraint that matters on this stock — side-return access on most plots, which gives an ev cable a straight run from the cu to a driveway charger without touching the front elevation.
NICEIC certificate, photo evidence of hidden work, Part P where applicable — all emailed the evening the job signs off.
Across SA12–SA13 the Edwardian semi stock we've worked on shares consistent patterns: front-bay window seats hiding original single-insulated conductors. That local pattern is baked into the quote, not discovered on the day.
Side-return access on most plots, which gives an EV cable a straight run from the CU to a driveway charger without touching the front elevation.
Wiring generation on this stock is typically rewired 1970s–2000s; front-bay circuits and porch lighting frequently missed on partial rewires. On a Edwardian semi you should expect us to flag: front-bay window seats hiding original single-insulated conductors; porch lighting on a spur off the hall circuit with no dedicated CPC; cellar or under-floor damp affecting the incoming supply.
Materials and methods we spec on edwardian semi work: metal-clad 18th Edition CU; TT earth rod where the DNO earth is missing; IP65 outdoor isolator on the side-return. Everything is priced on the quote — nothing added on invoice.
Owners of Edwardian semi properties in Port Talbot, Neath and the wider area get one point of contact for the lot — quote, work, certificate, after-care.
Two things: front-bay window seats hiding original single-insulated conductors, and the wiring generation — rewired 1970s–2000s. Both go on the quote, not the invoice.
Not unless the quote says so. On period stock in particular we route through floors, lofts and non-original plaster; cornices, dado rails and original panelling stay intact.
Common enough that we work on this stock most weeks. steelworks-era terraces in Aberavon and Sandfields, post-war semis in Baglan, and coastal properties towards Margam — the Edwardian semi is a recognisable slice of that mix.
Side-return access on most plots, which gives an EV cable a straight run from the CU to a driveway charger without touching the front elevation. We mark the route at survey and price against it.
If you take one thing from this page: the awkward part is the routing, not the install. On a Edwardian semi, side-return access on most plots, which gives an ev cable a straight run from the cu to a driveway charger without touching the front elevation — that's what the quote should reflect.
Calling is faster than a form when the Edwardian semi has quirks (front-bay window seats hiding original single-insulated conductors). Two-minute triage, honest read on lead time, booked into the diary the same call.
