cavity brick (early cavity construction), plasterboard-on-batten internally on some ceilings. Roof-space access is straightforward, loft cabling is easy — but plasterboard-on-batten ceilings mean second-fix downlight work needs careful joist mapping.
If you own a 1930s semi in Ystrad Mynach and need eicr — electrical safety checks, the right spec is usually not the most expensive one. On this stock the sensible answer is 18th Edition metal-clad CU — matched to the wiring generation, not a lift-and-shift from a new-build brochure.
That is the standard we quote to. Fixed price, honest survey, RCBO per circuit, and paperwork the next EICR won't question.
Focus on the porch or hallway, the consumer unit location, and the intended cable route. Usually 15–30 minutes on-site or a short photo set.
Priced against your 1930s semi's specific construction, not a template. Route sketched, materials listed, no line-item surprises.
Diary planned for the access constraint that matters on this stock — roof-space access is straightforward, loft cabling is easy — but plasterboard-on-batten ceilings mean second-fix downlight work needs careful joist mapping.
NICEIC certificate, photo evidence of hidden work, Part P where applicable — all emailed the evening the job signs off.
Across CF82 the 1930s semi stock we've worked on shares consistent patterns: ring finals extended into the kitchen or a rear extension without checking the R1+R2. That local pattern is baked into the quote, not discovered on the day.
Roof-space access is straightforward, loft cabling is easy — but plasterboard-on-batten ceilings mean second-fix downlight work needs careful joist mapping.
Wiring generation on this stock is typically rewired 1980s–2010s; ring finals commonly extended without upgrading the CU. On a 1930s semi you should expect us to flag: ring finals extended into the kitchen or a rear extension without checking the R1+R2; back-boiler removals leaving abandoned wiring in the airing cupboard; loft-conversion feeds spurred off the upstairs ring rather than a dedicated circuit.
Materials and methods we spec on 1930s bay-fronted semi work: 18th Edition metal-clad CU; RCBO per circuit; additional CU for a loft or garage sub-main where the main board is short of ways. Everything is priced on the quote — nothing added on invoice.
Owners of 1930s semi properties in Ystrad Mynach, Caerphilly and the wider area get one point of contact for the lot — quote, work, certificate, after-care.
Roof-space access is straightforward, loft cabling is easy — but plasterboard-on-batten ceilings mean second-fix downlight work needs careful joist mapping. We mark the route at survey and price against it.
No — surveys for Ystrad Mynach 1930s semi enquiries are free. You only pay once the fixed-price scope is agreed.
For a 1930s semi usually yes — a 15-minute survey or a set of photos of the porch or hallway and the consumer unit is enough to write a fixed price.
18th Edition metal-clad CU; RCBO per circuit; additional CU for a loft or garage sub-main where the main board is short of ways. All on the written quote.
Bottom line: 1930s bay-fronted semi owners in Ystrad Mynach deserve a quote calibrated to c.1925–1939 construction, not a template. That's what we do, on every job.
Send the address, a photo of the porch or hallway and the consumer unit, and the make the extension compliant you're working towards. Written fixed quote back inside 24 hours, priced to the actual construction of your 1930s semi.
