Security and PIR lighting for Swansea properties
Security and pir lighting across SA1–SA7 — scoped in writing, completed by the same electrician who quoted it. Available throughout Swansea, including Llanelli.
Security and pir lighting in a Swansea property is not the same conversation as it would be in a new build, and it should not be priced as if it were.
Too dim and it does nothing; too bright and badly aimed and it dazzles, creates deep shadow just outside the beam, and annoys the neighbours enough that it eventually gets switched off — which is the real failure. If the property is tenanted, the visit is arranged around access rather than around us, which usually means confirming times with whoever holds the keys. The schedule of results records it either way.
The point of a proper test is that the result is repeatable by anyone else with the same instrument. On coastal terraces and detached homes in Mumbles and Sketty it is worth ten minutes of anyone's time.
The most useful thing you can tell us on the first call is what changed immediately before you noticed the problem. Around SA1–SA7 it is the single most common reason a job runs long.
The practical question on this job is PIR detection zones set to the actual path, and it is answered by testing rather than by opinion. In Swansea that usually decides both the scope and the sequence of the visit. For coastal terraces and detached homes in Mumbles and Sketty that detail matters more than it does elsewhere.
Every circuit affected is identified and labelled, which makes the next person's job — and yours — considerably easier. We would explain the same thing on site, just with the board open.
Anything urgent found on the day is made safe first and discussed second. Written scopes mean you can compare us with anyone else on like-for-like terms.
If sensors mounted where passing traffic or pets trigger them is present, the report will say so with a photograph.
You may already have spotted light spill into a neighbour's bedroom window yourself.
Very high output floodlights creating glare and deeper shadow. We check it early because it is quick to eliminate.
Where access allows we PIR detection zones set to the actual path.
The visit covers weatherproof enclosures and glanding appropriate to the mounting position without a separate charge.
For coastal terraces and detached homes in Mumbles and Sketty in particular we rCD-protected supply with accessible isolation for maintenance.
We fittings aimed downward at approach routes, not horizontally across to the current edition of the wiring regulations.
Written with Swansea housing and Swansea Council requirements in mind.
The design brief
The useful setup is moderate output, aimed downward at the approach rather than outward at the boundary, with sensor coverage tuned to the path people actually walk. A light that comes on for every passing cat gets ignored, and an ignored light provides no security at all.
Decisions worth making early
PIR or dusk-to-dawn?
PIR for deterrence and alerting; low-output dusk-to-dawn for continuous visibility, often around doors. Many properties benefit from both, doing different jobs.
How bright?
Less than most people assume. Excessive output creates glare and contrast shadow that actively helps concealment.
The technical detail
- Weatherproof enclosures and glanding appropriate to the mounting position It goes on the schedule either way.
- Where the property allows: rCD-protected supply with accessible isolation for maintenance
- The practical version — fittings aimed downward at approach routes, not horizontally across boundaries
One thing worth repeating: sensor positioning matters more than fitting choice; we set and test the detection pattern on site rather than fitting and leaving.
Mistakes we get called in to correct
Installing in Swansea
Salt-laden coastal air strips lower-grade brass and unsealed enclosures quickly — IP65+ and stainless fixings are non-negotiable — which directly affects fitting choice on anything external.
Most of our Swansea work sits from Mumbles head along Swansea Bay through to Llansamlet.
We also cover Neath and Llanelli on the same rounds as Swansea.
Lighting questions from Swansea
Can it run from an existing outdoor circuit?
Often yes, provided that circuit has RCD protection and capacity. We check before quoting.
Who do I speak to on the day?
The electrician doing the work. There is no call centre between you and the person at the Swansea property.
What is not included?
Building work, decoration and anything outside the electrical scope. Those are flagged rather than absorbed.
Do I need to be there for the whole visit?
Only for access and for the walk-through at the end. Most owners in Swansea leave us to it once circuits are identified.
Do you provide a design or just install?
Both. We design the scheme against the room and the task, then install and certify it, so nobody is left interpreting someone else's drawing.
Book a test and report — Security and PIR lighting in Swansea
Describe what the property is doing and when it started. We will tell you whether it is urgent or plannable. We cover Swansea and the SA1–SA7 postcodes, including Llanelli, for security and pir lighting. Swansea Council notification is handled by us where the work requires it.
Security and pir lighting across SA1–SA7 — scoped in writing, completed by the same electrician who quoted it. Available throughout Swansea, including Llanelli.