Titan Electrical Solutions

Electrical Installation Condition Report (EICR) in Pontypridd

A Pontypridd visit for landlord electrical safety certificate starts with measurement and ends with a document you can hand to someone else. Pontypridd coverage for landlord electrical safety certificate includes Caerphilly at the same rates.

  1. 1. Dead testing with the supply isolated: continuity, insulation resistance and polarity across each circuit
  2. 2. Where it applies: report issued with each observation coded and photographed where relevant
  3. 3. Live testing: earth fault loop impedance and RCD operating times
  4. 4. Typically — visual inspection of the board, accessories, bonding and any accessible cabling

What matters for landlord electrical safety certificate is the condition of this installation, not the average condition of installations generally.

There is no single right answer for landlord electrical safety certificate — the correct one depends on the age of the installation and how it has been altered since. It is one reason we quote after the survey rather than over the phone.

The point of a proper test is that the result is repeatable by anyone else with the same instrument. In practice that means checking dead testing with the supply before anything is replaced.

A written record matters as much as the work. Anything we find at a CF37–CF38 address is documented in a form you can hand to someone else. It is written into the report either way, so nothing is hidden.

Properties around Pontypridd that have changed use — a room converted, an extension added — usually need a wider look than the original request implies. Anyone testing properly will reach the same conclusion.

A property in Pontypridd that has never been inspected is not necessarily unsafe — it is simply unknown, and that is the part worth fixing. It rarely changes the price, but it does change the plan.

There is no benefit to us in recommending work that testing does not support, and plenty of downside. Written scopes mean you can compare us with anyone else on like-for-like terms.

The previous report reaching its five-year expiry. Left alone it tends to widen rather than settle.

On the Pontypridd side of the A470 and A4054 this is a familiar one: a local authority licensing condition on an HMO.

A tenant raising a safety concern about the wiring, which is why the whole circuit gets tested and not just the visible part.

A new tenancy starting and the agent asking appears on a fair number of the properties we inspect nearby.

Every visit includes this: live testing: earth fault loop impedance and RCD operating.

Part of the visit: visual inspection of the board, accessories, bonding and any.

We report issued with each observation coded and photographed where and explain what the numbers mean for the property.

Dead testing with the supply isolated, with photographs where something needs showing.

Scope, access and timing below assume a CF37–CF38 address.

What the result can say

Unsatisfactory — one or more C1, C2 or FI codes; remedial work needed and a further certificate on completion. It is recorded on the paperwork.
Where it applies: C3 observations only — satisfactory, with recommended improvements listed for planning.

Why people in Pontypridd ask for it

  • A local authority licensing condition on an HMO. It is recorded on the paperwork.
  • Where it applies: a tenant raising a safety concern about the wiring.
  • A new tenancy starting and the agent asking for current paperwork. It is part of the standard scope.

What happens on the day

  1. 1Dead testing with the supply isolated: continuity, insulation resistance and polarity across each circuit. It is recorded on the paperwork.
  2. 2Where it applies: report issued with each observation coded and photographed where relevant.
  3. 3Live testing: earth fault loop impedance and RCD operating times. It is part of the standard scope.
  4. 4Typically — visual inspection of the board, accessories, bonding and any accessible cabling.

What it costs: a typical two or three bedroom property takes two to four hours on site, with the report issued the same or next working day.

Pontypridd context

Rhondda Cynon Taf County Borough Council handles building control notification for Pontypridd, and we register notifiable work there as part of the job.

Travel to Pontypridd is already built into how the week is planned, so it does not appear on your invoice as a surcharge.

Anywhere between Cardiff and Pontypridd is standard coverage, not an extra.

new 18th Edition consumer unit fitted with RCBO protection completed during a eicr — electrical safety checks job in the Pontypridd area — Pontypridd (CF37–CF38) — Landlord electrical safety certificate, Pontypridd: an ordinary day's work rather than a showcase

What the electrical installation condition report (eicr) actually covers

It is a report rather than a pass mark. Every defect found is coded, and only C1, C2 and FI codes make an installation unsatisfactory. C3 items are improvement recommendations and do not fail the report, which is a distinction some agents get wrong.

This applies at any CF37–CF38 address: under the Renting Homes (Wales) Act 2016 framework, landlords in Wales must have the electrical installation inspected and tested at least every five years by a qualified person and provide a copy of the report to the contract-holder.

Questions about the electrical installation condition report (eicr)

Do you charge to come out and look?

Attendance and testing are quoted before we travel to Pontypridd, so there is nothing added afterwards that was not agreed.

What is not included?

Building work, decoration and anything outside the electrical scope. Those are flagged rather than absorbed.

Is older wiring automatically a problem?

No. Plenty of older Pontypridd installations test well. Age is a reason to check, not a verdict.

Do I need to be there for the whole visit?

Only for access and for the walk-through at the end. Most owners in Pontypridd leave us to it once circuits are identified.

How quickly can you attend in Pontypridd?

A typical two or three bedroom property takes two to four hours on site, with the report issued the same or next working day. The local mix includes USW student HMO landlords and Treforest Estate workshops, which changes what we carry on the van.

Book this in for your Pontypridd property

Booking is by phone or form; either way you speak to the person who would carry out the work. Access details for the Pontypridd property are the only thing we need to get started.

🔒 No spam. Fast response, 8am – 9pm 7 days a week.

A Pontypridd visit for landlord electrical safety certificate starts with measurement and ends with a document you can hand to someone else. Pontypridd coverage for landlord electrical safety certificate includes Caerphilly at the same rates.